NEW FOR GOLF COURSES
Rye Boulder F1
Fairway mowing that runs itself.
Boulder F1 is an autonomous three-cylinder fairway mower from Rye Robotics. It drives itself from the charging station to the fairway, cuts with real reels and returns to charge – with no operator on board.

7 000 m²/h
mowing output according to the manufacturer
1.55 m
cutting width with three reels
10–12 h
runtime per charge
70 000 m²
coverage area according to the manufacturer
According to the Rye Robotics brochure. Actual output and runtime depend on the course and conditions.
A whole run without an operator
Boulder F1 does not need anyone to drive it between fairways. It follows a schedule: it leaves the charging station, mows fairway A, drives across to fairway B on its own, mows that and returns to charge.

1 Charging dock · 2 Fairway A mowing · 3 Auto transit · 4 Fairway B mowing · 5 Auto return and recharge. Diagram from Rye Robotics.
The transfer between fairways decides how much labour the robot actually saves. That is why it is part of the basic function of Boulder F1, not an option.

Real reel cutting
Three cutting units with 8 or 11 blades per reel give a 1.55 m cutting width. The cutting height can be set between 6.35 and 31.75 mm, and active brushes on the rear rollers keep the surface even after every pass.
Reel cutting is the cut greenkeepers already know from manned fairway mowers. This is the same principle, without an operator.
Navigation, sensors and safety
Positioning is based on dual-antenna NRTK and SLAM. 3D LiDAR, three 3D cameras and four RGB cameras give the machine a picture of the course and of whatever is in the way.
Mow when the course is empty
Boulder F1 is fully electric: no diesel and no exhaust. That means mowing can be scheduled at night or early in the morning, so the fairways are ready before the first tee time.
The manufacturer describes the operation as quiet. We have not yet received a measured noise level, and we will publish it as soon as we have one.
With 10–12 hours of runtime per charge and a charging time of 8 hours at 16 amps (10 hours from a standard 10-amp outlet), mowing and charging fit within a day.


Run the fleet from your phone
The Rye Robotics app collects what you need every day:
- Monitor: robot status and mowing progress
- Patterns: set routes and mowing patterns
- Schedule: plan tasks by zone and time
- Reports: review completed work
The screenshot shows the map view in the Rye Robotics app.
See Boulder F1 at work
Three short films: the machine on slopes, a whole run from the charging station to the fairway and back, and a short presentation.
Already running on courses in Asia
Rye Robotics reports Boulder F1 in operation at, among others, Nanhu Golf & Country Club in China and Namchon Country Club in South Korea. The photo shows two Boulder F1 at Nanhu.
In Sweden Boulder F1 is new. We will gladly put together a proposal and a demo for your course.

Specifications
Source: Rye Robotics brochure (published ratings). Actual output and runtime depend on the course and operating conditions.
The company behind Boulder F1
Rye Robotics was founded in Los Angeles in 2022 and develops robotic mowers for golf courses. The core team is largely made up of engineers from the University of Cambridge and UCLA with a background in autonomous driving and robotics. In 2026 the company set up its own manufacturing in China for volume production. RoboService is the reseller for Rye Robotics in Sweden.
Rye's product plan includes Boulder R1 for rough and semi-rough (target: Q1 2027) and G1, a single-reel greens mower (target: Q2 2027). The dates are the manufacturer's targets.
Frequently asked questions about Boulder F1
What is the Rye Boulder F1?
An autonomous three-cylinder fairway mower for golf courses from Rye Robotics. It drives, mows and charges itself on a schedule you set in the app.
Does it use reel or rotary cutting?
Reel. Three cutting units with 8 or 11 blades per reel give a 1.55 m cutting width, and the cutting height can be set between 6.35 and 31.75 mm.
How does it find its way and avoid obstacles?
With dual-antenna NRTK and SLAM, backed by 3D LiDAR and seven cameras. Rye states that the machine has safety and obstacle detection. NRTK needs a correction signal over the mobile network, and RoboService offers RTK subscriptions.
How long does it run and how does it charge?
10–12 hours per charge. Charging takes 8 hours at 16 amps and 10 hours from a standard 10-amp outlet. The battery is LFP at 51.2 V and 618 Ah, and the machine drives itself to its charging station.
How steep a slope can it handle?
Up to 25° when mowing and 35° when driving, according to the manufacturer.
What does it cost?
The price depends on configuration, delivery and service, so we give it in a quote. Tell us about your course and we will come back with a proposal.
Can it drive itself between fairways?
Yes. Boulder F1 leaves the charging station, mows fairway A, drives itself across to fairway B, mows that and returns to charge. Areas that are only to be driven across, such as a road or a path, are added to the map as transport areas.
Can it mow in different patterns and angles?
Yes. For each fairway you set the driving direction (forward or reverse) and angle, stripe width and number of edge laps. In the schedule you then choose a pattern per weekday, for example one pattern on Monday and another on Tuesday. You choose the direction according to what the turf needs.
How does the machine know where the course boundaries are?
The course is mapped at installation. You walk along the edge of the fairway with a mapping unit, and the boundary, bunkers, water, trees and drainage wells are added to the map. After that the machine knows what to mow and what to avoid. The map can be edited afterwards.
What happens if something is in the way?
Boulder F1 has 3D LiDAR and seven cameras. If the machine meets something unexpected, such as a forgotten club or a marker stake, it avoids it and places a marker on the map in the app. Once the area is cleared you acknowledge the marker.
Can I drive it by hand?
Yes, with the remote control for manual driving and alignment. Automatic mode is only switched on once someone has pressed the Auto button on the remote, so the machine does not start by itself just because it is powered on.
How much does it weigh?
The whole machine weighs 967 kg including the battery, and each cutting unit weighs 77 kg as a complete unit. The charging station and mapping cart are additional.
Can it mow rough, greens or football pitches?
Boulder F1 is built for fairways, and we sell it for golf. Rye is developing models for rough (R1) and greens (G1), but they are not launched. For rough and sports turf we already have FJDynamics RM21P and FJDynamics RCM01.
See Boulder F1 on your course
Tell us about the course: number of holes, fairway area and when mowing has to be finished. Then we will put together a proposal and a demo.
See also: robotic mowers for golf courses · FJDynamics RCM01 · FJDynamics RM21P
| Dimensions (L × W × H) | 2,100 × 1,700 × 1,200 mm |
| Number of blades/discs | 3 reels (8 or 11 blades) |
| Cutting height | 6.35–31.75 mm |
| Battery capacity | 51.2 V, 618 Ah (LFP) |
| Speed | Up to 10 km/h |
| Max. slope | Driving 35° (mowing 25°) |
| Standard charging time | 8 h at 16 A, 10 h at 10 A |
| Average mowing time | 10–12 h |
| IP class | IP66 |
| Product type | Robotic lawn mower |
| Positioning technology | Dual-antenna NRTK + SLAM + 3D LiDAR |
| Cutting width | 1,550 mm |