Skip to Content

Rye Boulder F1 – Autonomous Fairway Mower for Golf Courses (3-Gang Reel)

  • Autonomous three-cylinder fairway mower for golf courses – mows without an operator
  • 1.55 m cutting width, 6.35–31.75 mm cutting height and 7,000 m²/h according to the manufacturer
  • Dual-antenna NRTK + SLAM with 3D LiDAR and seven cameras
  • 10–12 hours per charge – drives itself to the charging station and back
  • Dimensions (L × W × H)
  • Number of blades/discs
  • Cutting height
  • Battery capacity
  • Speed
  • Max. slope
  • Standard charging time
  • Average mowing time
  • IP class
  • Product type
  • Positioning technology
  • Cutting width

NEW FOR GOLF COURSES

Rye Boulder F1

Fairway mowing that runs itself.

Boulder F1 is an autonomous three-cylinder fairway mower from Rye Robotics. It drives itself from the charging station to the fairway, cuts with real reels and returns to charge – with no operator on board.

Rye Boulder F1 mowing a fairway by a lake in backlight

7 000 m²/h

mowing output according to the manufacturer

1.55 m

cutting width with three reels

10–12 h

runtime per charge

70 000 m²

coverage area according to the manufacturer

According to the Rye Robotics brochure. Actual output and runtime depend on the course and conditions.

A whole run without an operator

Boulder F1 does not need anyone to drive it between fairways. It follows a schedule: it leaves the charging station, mows fairway A, drives across to fairway B on its own, mows that and returns to charge.

Diagram of a mowing run: charging dock, fairway A, auto transit, fairway B and return to recharge

1 Charging dock · 2 Fairway A mowing · 3 Auto transit · 4 Fairway B mowing · 5 Auto return and recharge. Diagram from Rye Robotics.

The transfer between fairways decides how much labour the robot actually saves. That is why it is part of the basic function of Boulder F1, not an option.

Rye Boulder F1 from the front with the three cutting reels

Real reel cutting

Three cutting units with 8 or 11 blades per reel give a 1.55 m cutting width. The cutting height can be set between 6.35 and 31.75 mm, and active brushes on the rear rollers keep the surface even after every pass.

Reel cutting is the cut greenkeepers already know from manned fairway mowers. This is the same principle, without an operator.

Navigation, sensors and safety

Positioning is based on dual-antenna NRTK and SLAM. 3D LiDAR, three 3D cameras and four RGB cameras give the machine a picture of the course and of whatever is in the way.

Dual-antenna NRTK

Two antennas give position and heading. NRTK needs a correction signal over the mobile network, and RoboService offers RTK subscriptions.

SLAM and 3D LiDAR

The machine builds a map of its surroundings while driving and uses it to stay on course.

Seven cameras

Three 3D cameras and four RGB cameras complement the LiDAR. Rye states that the machine has safety and obstacle detection.

Mow when the course is empty

Boulder F1 is fully electric: no diesel and no exhaust. That means mowing can be scheduled at night or early in the morning, so the fairways are ready before the first tee time.

The manufacturer describes the operation as quiet. We have not yet received a measured noise level, and we will publish it as soon as we have one.

With 10–12 hours of runtime per charge and a charging time of 8 hours at 16 amps (10 hours from a standard 10-amp outlet), mowing and charging fit within a day.

Rye Boulder F1 mowing a fairway in the dark with its own work lights
Map view in the Rye Robotics app showing robot positions on a golf course

Run the fleet from your phone

The Rye Robotics app collects what you need every day:

  • Monitor: robot status and mowing progress
  • Patterns: set routes and mowing patterns
  • Schedule: plan tasks by zone and time
  • Reports: review completed work

The screenshot shows the map view in the Rye Robotics app.

See Boulder F1 at work

Three short films: the machine on slopes, a whole run from the charging station to the fairway and back, and a short presentation.

Already running on courses in Asia

Rye Robotics reports Boulder F1 in operation at, among others, Nanhu Golf & Country Club in China and Namchon Country Club in South Korea. The photo shows two Boulder F1 at Nanhu.

In Sweden Boulder F1 is new. We will gladly put together a proposal and a demo for your course.

Two Rye Boulder F1 at the entrance to Nanhu Golf & Country Club

Boulder F1 up close

Photos of our Boulder F1, retouched for background, light and distracting reflections.

The cutting units

The cutting units up close: reel, roller and mounting points.

Cutting-reel unit and roller on the Rye Robotics Boulder F1.
Cutting-reel unit and roller
Cutting unit from the side on the Rye Robotics Boulder F1.
Cutting unit from the side
Reel and cutting mechanism on the Rye Robotics Boulder F1.
Reel and cutting mechanism
Actuator and mechanical mounts on the Rye Robotics Boulder F1.
Actuator and mechanical mounts
Springs and mounting at the cutting unit on the Rye Robotics Boulder F1.
Springs and mounting at the cutting unit
Mechanical details by the wheel on the Rye Robotics Boulder F1.
Mechanical details by the wheel
Front cover and cutting unit on the Rye Robotics Boulder F1.
Front cover and cutting unit

Sensors and lighting

The sensor unit and lights on the front, and the two black units on the top cover.

Front with sensors and lighting on the Rye Robotics Boulder F1.
Front with sensors and lighting
Front sensor unit on the Rye Robotics Boulder F1.
Front sensor unit
Front light bar on the Rye Robotics Boulder F1.
Front light bar
Two black units on the white top cover of the Rye Robotics Boulder F1.
Two black units on the top cover

Emergency stop and warning light

The emergency stop and the orange warning light on the top cover.

Emergency stop in close-up on the Rye Robotics Boulder F1.
Emergency stop, close-up
Emergency stop and top cover on the Rye Robotics Boulder F1.
Emergency stop and top cover
Orange warning light on the Rye Robotics Boulder F1.
Orange warning light

Wheels, chassis and charging

Wheels, tyres and chassis, and the connections at the charging station.

Tyre and chassis on the Rye Robotics Boulder F1.
Tyre and chassis
Side panel and wheel on the Rye Robotics Boulder F1.
Side panel and wheel
Wheel and tyre on the Rye Robotics Boulder F1.
Wheel and tyre
Connection to the charging station on the Rye Robotics Boulder F1.
Connection to the charging station
Open rear connector on the Rye Robotics Boulder F1 with a silver protective cap hanging on a chain.
Rear connector with protective cap

Covers and markings

Handles, side covers and logo.

Recessed handle and side panel on the Rye Robotics Boulder F1.
Recessed handle and side panel
Logo on the front cover of the Rye Robotics Boulder F1.
Logo on the front cover
Side cover with handle and logo on the Rye Robotics Boulder F1.
Side cover with handle and logo

Specifications

Cutting systemThree-gang cylinder mower
Cutting width1.55 m
Cutting height6.35–31.75 mm
Reels8 or 11 blades
Mowing output (rated)7 000 m²/h
Coverage area (rated)70 000 m²
BatteryLFP, 51.2 V, 618 Ah
Runtime10–12 hours per charge
Charging time8 hours at 16 A, 10 hours from a standard 10 A outlet
LocalizationDual-antenna NRTK + SLAM
Sensors3D LiDAR, 3 × 3D cameras, 4 × RGB cameras
Drive motors4 × 1,800 W (1.8 kW)
Steering motors2
Cutting motors1,500 W each
Maximum speed10 km/h
Max slope (mowing / travel)25° / 35°
Weight per cutting unit77 kg
Weight, whole machine967 kg including battery (charging station and mapping cart extra)
Dimensions (L × W × H)2.1 × 1.7 × 1.2 m
Protection ratingIP66

Source: Rye Robotics brochure (published ratings). Actual output and runtime depend on the course and operating conditions.

The company behind Boulder F1

Rye Robotics was founded in Los Angeles in 2022 and develops robotic mowers for golf courses. The core team is largely made up of engineers from the University of Cambridge and UCLA with a background in autonomous driving and robotics. In 2026 the company set up its own manufacturing in China for volume production. RoboService is the reseller for Rye Robotics in Sweden.

Rye's product plan includes Boulder R1 for rough and semi-rough (target: Q1 2027) and G1, a single-reel greens mower (target: Q2 2027). The dates are the manufacturer's targets.

Frequently asked questions about Boulder F1

What is the Rye Boulder F1?

An autonomous three-cylinder fairway mower for golf courses from Rye Robotics. It drives, mows and charges itself on a schedule you set in the app.

Does it use reel or rotary cutting?

Reel. Three cutting units with 8 or 11 blades per reel give a 1.55 m cutting width, and the cutting height can be set between 6.35 and 31.75 mm.

How does it find its way and avoid obstacles?

With dual-antenna NRTK and SLAM, backed by 3D LiDAR and seven cameras. Rye states that the machine has safety and obstacle detection. NRTK needs a correction signal over the mobile network, and RoboService offers RTK subscriptions.

How long does it run and how does it charge?

10–12 hours per charge. Charging takes 8 hours at 16 amps and 10 hours from a standard 10-amp outlet. The battery is LFP at 51.2 V and 618 Ah, and the machine drives itself to its charging station.

How steep a slope can it handle?

Up to 25° when mowing and 35° when driving, according to the manufacturer.

What does it cost?

The price depends on configuration, delivery and service, so we give it in a quote. Tell us about your course and we will come back with a proposal.

Can it drive itself between fairways?

Yes. Boulder F1 leaves the charging station, mows fairway A, drives itself across to fairway B, mows that and returns to charge. Areas that are only to be driven across, such as a road or a path, are added to the map as transport areas.

Can it mow in different patterns and angles?

Yes. For each fairway you set the driving direction (forward or reverse) and angle, stripe width and number of edge laps. In the schedule you then choose a pattern per weekday, for example one pattern on Monday and another on Tuesday. You choose the direction according to what the turf needs.

How does the machine know where the course boundaries are?

The course is mapped at installation. You walk along the edge of the fairway with a mapping unit, and the boundary, bunkers, water, trees and drainage wells are added to the map. After that the machine knows what to mow and what to avoid. The map can be edited afterwards.

What happens if something is in the way?

Boulder F1 has 3D LiDAR and seven cameras. If the machine meets something unexpected, such as a forgotten club or a marker stake, it avoids it and places a marker on the map in the app. Once the area is cleared you acknowledge the marker.

Can I drive it by hand?

Yes, with the remote control for manual driving and alignment. Automatic mode is only switched on once someone has pressed the Auto button on the remote, so the machine does not start by itself just because it is powered on.

How much does it weigh?

The whole machine weighs 967 kg including the battery, and each cutting unit weighs 77 kg as a complete unit. The charging station and mapping cart are additional.

Can it mow rough, greens or football pitches?

Boulder F1 is built for fairways, and we sell it for golf. Rye is developing models for rough (R1) and greens (G1), but they are not launched. For rough and sports turf we already have FJDynamics RM21P and FJDynamics RCM01.

See Boulder F1 on your course

Tell us about the course: number of holes, fairway area and when mowing has to be finished. Then we will put together a proposal and a demo.

See also: robotic mowers for golf courses · FJDynamics RCM01 · FJDynamics RM21P


Dimensions (L × W × H) 2,100 × 1,700 × 1,200 mm
Number of blades/discs 3 reels (8 or 11 blades)
Cutting height 6.35–31.75 mm
Battery capacity 51.2 V, 618 Ah (LFP)
Speed Up to 10 km/h
Max. slope Driving 35° (mowing 25°)
Standard charging time 8 h at 16 A, 10 h at 10 A
Average mowing time 10–12 h
IP class IP66
Product type Robotic lawn mower
Positioning technology Dual-antenna NRTK + SLAM + 3D LiDAR
Cutting width 1,550 mm
Failed to save your selection. Please try again.