OrionStar CleaniBot M1 3D
Full-Auto Cleaning Workhorse - Enhanced 3D Navigation
CleaniBot M1 3D takes the proven CleaniBot M1 cleaning platform - scrubbing, sweeping and dust mopping in one autonomous machine - and adds an 11-sensor fusion suite built around a 3D LiDAR. The result is more precise, resilient navigation in large commercial spaces where the layout keeps changing: shifting product displays, moved furniture, new pallets and equipment. It is built for large office complexes, campuses, transportation hubs, shopping centers and hospitals.
Key Highlights
11-Sensor Fusion, 2cm Low-Obstacle Avoidance
360-degree surround vision for superior environmental recognition, line-laser precision that eliminates near-ground blind spots, and adaptive logic for dynamic, feature-aware obstacle avoidance.
Precise Navigation in Dynamic, Large Spaces
All-environment stability from factory floors to shopping malls, layout-aware performance that adapts to shifting displays and new materials, and maximized autonomy through precise localization.
60% Layout Change, No Remapping
Full-spectrum sensing combines 3D and 2D LiDAR into one continuous navigation map, so M1 3D sustains positioning even when up to 60% of the environment shifts - without a manual remap.
The Same Proven Cleaning System as CleaniBot M1
50cm main brush scrubbing, sweeping and dust mopping, dual 35L clean / 33L wastewater tanks, and a water station and charging dock that keep it running around the clock without staff intervention.
Where CleaniBot M1 3D Works Best
M1 3D is built for large, busy commercial and institutional spaces where the layout changes often:
Important: Floor Type Compatibility
M1 3D shares the same scrubbing, sweeping and dust-mopping system as CleaniBot M1, and the same floor guidance applies: it is designed for hard flooring such as marble, terrazzo, plastic floor, ceramic tile, artificial stone and epoxy resin, and cannot be used on carpets or wood floors. Talk to us before ordering if you are unsure whether your floor type is suitable.
Full Specifications
| Dimensions (L x W x H) | 775 x 681.5 x 1050 mm |
| Net Weight | 126.5 kg (unladen) |
| Max Operating Speed | 1.2 m/s |
| Max Obstacle Climbing | 20 mm |
| Max Gradeability | 8° |
| Min Passing Width | 850 mm |
| Noise Level | Scrubbing <78 dB(A); Dust Mopping <65 dB(A) |
| Battery | 28.8 Vdc, 60 Ah |
| Charging Time | 2.5 hours |
| Battery Life | Scrubbing: 3.5h; Mopping: 8h |
| Cleaning Width (main brush) | 500 mm |
| Max Cleaning Efficiency | 1200 m²/h |
| Clean Water Tank | 35 L |
| Waste Water Tank | 33 L |
| Maximum Garbage Height | 5 cm |
| Dust Bin Capacity | 0.9 L |
| Sensors | 3D LiDAR, 2D LiDAR, RGB-D sensor, line laser, geomagnetic sensor, air pressure bumper |
| Auto Recharge | Supported |
| Network Connectivity | Wi-Fi / 4G |
| Cleaning Modes | Scrubbing, Dust Mopping, Water Absorption |
| Water Station | Supported |
| Applicable Floor Types | Marble, Terrazzo, Plastic Floor, Ceramic Tile, Artificial Stone, Epoxy Resin |
Frequently Asked Questions
What is different between CleaniBot M1 3D and the standard CleaniBot M1?
M1 3D uses the same proven scrubbing, sweeping and dust-mopping system as the standard M1 - same 500mm main brush, same 35L/33L water tanks, same cleaning modes. What changes is the sensor suite: M1 3D adds a 3D LiDAR on top of the 2D LiDAR, RGB-D camera, line laser and geomagnetic sensor, giving it a full-spectrum 3D/2D LiDAR fusion for more precise, resilient navigation in large spaces where the layout changes often.
What environments is M1 3D built for?
Large office complexes, campuses, transportation hubs, shopping centers and hospitals - spaces that are both large and dynamic, where furniture, displays and equipment are regularly moved around.
What does "60% layout change, no remapping" mean in practice?
M1 3D fuses its 3D and 2D LiDAR data into one continuous navigation map. That gives it enough redundancy to sustain accurate positioning even when up to 60% of the surrounding environment has shifted - moved shelving, new pallets, rearranged furniture - without staff needing to manually remap the space.
Does M1 3D still have the water station and auto-refill from the standard M1?
Yes. Water station support, automatic clean-water refill, automatic wastewater drainage and automatic recharging are all supported, using the same 35L clean water / 33L wastewater tank capacity as the standard M1, for continuous unattended operation.
Is it in stock?
No - CleaniBot M1 3D is a backorder item and is not kept in RoboService's warehouse. Contact us for current lead time and pricing.
What does the price include?
Pricing for CleaniBot M1 3D is confirmed on request directly with RoboService, since this is a large commercial machine ordered per project - contact us for a quote.
| Mått | 775 x 681.5 x 1050 mm (L x W x H) |
| Vikt | 126.5 kg (unloaded) |
| Batteritid | Scrubbing: 3.5 h; Dust mopping: 8 h |
| Laddningstid | 2.5 h |
| Produkttyp | Cleaning robot - scrub, sweep and dust-mop, with added 3D LiDAR navigation (large, with water station) |
| Rengöringsbredd | 500 mm |
| Rengöringseffektivitet | 1200 m²/h |
| Vattentankskapacitet | 35 L clean water / 33 L wastewater |
| Ljudnivå | Scrubbing <78 dB(A) / Dust mopping <65 dB(A) |
| Dammbehållare | 0.9 L |